The RXT6 is a passive very compact subwoofer enclosure with our newRXW6, 6,5″ driver that works very well in this small 4,5 litres sealed enclosure.
Covered with black felt mat of the highest quality.
Fastening bracket is included.
The small RXT6 can be mounted under the dash board on the passenger side, or in the trunk. The best result is normally achieved when installed under the dashboard directed to the right, but feel free to try other places.
NEW product! In stock from octoberber 2012.
How to use the RXT6 in combination with an external amplifier like XM20 or others.
- Install the bass tube under the dash board in the front of the car. (It does not perform well in the trunk).
- Set the amplifiers LPF crossover to 50 or 60 Hz.
- Set the amplifiers gain to 50 or 60% (half or a bit more)
- Set the head units bass control to flat (0) and disconnect loudness, bass boost etc.
This will give the best performance.
|Power handling capacity||300 Watt|
|Max power handling capacity||500 Watt|
|Woofer size||6,5″ / 165 mm|
|Dimension (W x D x H)||Length 33 cm, diameter only 18 cm|
|Recommended amplifier||Max power 300 Watt, min power 140 Watt|
|Rec. crossover point||Low Pass 50 – 60 Hz|
|Weight||3,55 kg / 7,8 lbs|